Honda Engine Repairs
Most Honda engine repairs are a direct case of improper maintenance. When the Honda Engine won’t be used for extended periods of time, you should drain the fuel and let the machine run until all of the fuel in the tank has been used. Then turn off the fuel valve off to avoid having problems with the float in the carburetor. You should also make sure that you run Antifreeze through the pump system so it doesn’t freeze and damage your pump!
The Top Ten Honda Engine Repairs
Honda Engine Repairs for Pressure Washers” alt=”Honda Engine Repairs for Pressure Washers” src=”https://sunbritesupplymd.com/wp-content/uploads/2011/03/skid-mount.jpg” width=”160″ height=”125″ />
Problem: Engine won’t start or hard to start.
* Fuel tank empty, shutoff valve closed, fuel line or fuel tank cap vent clogged.
* Water in fuel.
* Carburetor over choked.
* Carburetor improperly adjusted or needs service. Need Honda Engine Repairs.
* Ignition system, wiring defective, ignition switch or timing off.
* Cutoff switch open or defective.
* Spark plug fouled, improperly gapped, or damaged.
* Engine compression is poor.
Problem: Engine starts easily but dies.
* Fuel tank empty, shutoff valve closed, fuel line or tank cap vent clogged.
* Carburetor over choked.
* Carburetor needs adjustment or service. Need Honda Engine Repairs.
Problem: Engine idles roughly, unevenly, or surges.
* Carburetor dirty.
* Air leak in carburetor or intake manifold.
* Carburetor improperly adjusted or needs service. Need Honda Engine Repairs.
Problem: Engine misses.
* Spark plug fouled, improperly gapped, or damaged.
* Breaker points are pitted or improperly gapped, breaker arm sluggish, or condenser is bad.
* Carburetor adjustment or service. Need Honda Engine Repairs.
* Fuel line, fuel filter, fuel tank cap vent clogged, or fuel shutoff valve partially closed.
* Valves not adjusted properly or valve springs weak.
* Exhaust ports blocked (2 stroke).
Problem: Engine knocks.
* Magneto not timed properly.
* Carburetor set too lean.
* Engine has overheated.
* Carbon buildup in combustion chamber.
* Flywheel loose.
* Connecting rod loose or worn.
* Cylinder worn.
Problem: Engine vibrates excessively.
* Engine not mounted securely.
* Blade or other driven equipment unbalanced.
* Crankshaft bent.
* Counterbalance shaft not timed correctly.
Problem: Engine lacks power (after warm-up).
* Old gas, bad spark plug, very thick/dirty oil.
* Choke partially closed.
* Carburetor needs adjustment or service. Need Honda Engine Repairs.
* Ignition not timed correctly.
* Air filter clogged.
* Lack of lubrication.
* Valves not sealing properly.
* Piston rings not sealing properly.
* Head loose or head gasket blown or damaged.
* Exhaust ports blocked (2 stroke).
Problem: Engine operates erratically, surges, and runs unevenly.
* Fuel line or tank cap vent is clogged.
* Water in fuel.
* Fuel pump defective.
* Governor not set properly, sticking, or binding.
* Carburetor needs adjustment or service. Need Honda Engine Repairs.
* Loose carburetor/intake pipe.
Honda Engine Repairs Specialist can help!
Problem: Engine overheats.
* Magneto not timed properly.
* Carburetor set too lean.
* Air intake or cooling fins clogged.
* Shroud or blower housing missing.
* Excessive load.
* Too much or too little oil.
* Improper oil viscosity (4 stroke) or mixture (2 stroke)
* Valve clearance too small.
* Excessive carbon buildup in combustion chamber.
Problem: Crankcase breather passing oil.
* Too much oil in crankcase.
* Engine speed excessive.
* Oil fill cap or gasket damaged or missing.
* Breather mechanism dirty or defective.
* Piston ring gaps are aligned.
* Piston rings are worn.
Problem: Engine backfires.
* Carburetor set too lean.
* Magneto not timed correctly.
* Valves sticking.
Connect With Us!