Fleet Washing Chemicals From Sun Brite Supply
Truck Washing And Fleet washing Chemicals
We carry fleet washing chemicals for contractors that are deciding to venture further into fleet washing. The work is steady, year-round, and it pays well in high volume. Buying a soft bristle brush and fleet washing chemicals.
We carry a number of fleet washing chemicals and types of washing methods for vehicles. In fleet washing you want to wash 150 trucks quickly and get professional results.
One professional method is called “two-stepping”. In this technique, you hit the dirty surface with acid-based fleet washing chemicals and then finish with an alkaline neutralizer. By switching between the opposite ends of the pH spectrum, the dirt is “popped” off the surface. These acid based fleet washing chemicals are used for the first part of the process is usually made with hydrofluoric acid. One of our hydrofluoric-based fleet washing chemicals is called Aluma Brite. It’s aggressive fleet washing chemicals are perfect for any type of truck, fleet, or aluminum surfaces.
Fleet Washing Chemicals usually use Hydrofluoric acid
Hydrofluoric acid is found in many fleet washing chemicals and is extremely dangerous for inexperienced people to use. It travels through the skin to seek and destroy the calcium in your bones and body. Severe exposure to hydrofluoric acid can be fatal in a matter of hours.
Since so many fleet washing companies rely on the two – step method for fast, effective results, Sun Brite Supply developed a Safety Ointment for emergency use after exposure to hydrofluoric. It can add several hours of time for you to get medical attention. We offer this with every purchase of our hydrofluoric fleet washing chemicals.
We also offer alternatives to hydrofluoric- based fleet washing chemicals, for those who are willing to sacrifice some of the aggressiveness of hydrofluoric for the safety of a different acid. We offer a citric/phosphoric solution called Aluma Safe that we sell all over the country to fleet washing companies. Specially tested and designed for fleet washing contractors, these fleet washing chemicals are made to remove the toughest stains and soil from any type of fleet or construction equipment.
Fleet Washing Chemicals such as Big Truck Brite & Fleet Brite are my personal favorites.
These fleet washing chemicals are less aggressive than the hydrofluoric, but they can be used on all surfaces. Big Truck Brite leaves the vehicle with a near-wax shine. Fleet Brite is for those that was UPS or Frito Lay trucks which are paint only surfaces. Wet Wax that you can add to any fleet washing chemicals to get that shine on the vehicle that fleet managers are looking for. (NOTE: We have lots of customers who even buy Wet Wax and add it to house wash mixtures for a nice gleam on vinyl and aluminum!)
Besides all of these concentrated fleet washing chemicals, we offer a powder called Pearl Sheen fleet washing product. This product is relatively new to our stable from the folks at Extreme Solutions (the HD-80 people).
Most fleet washing chemicals work better with hot water than cold. If you don’t have a hot water pressure washer, you will use about twice the amount of fleet washing chemicals to get the job done. Sun Brite Supply has Hot Boxes, which are heaters designed to connect to cold water machines.
Many cleaners like to use de- ionized water (D. I. for short). This water goes through a treatment that makes it rinse off the vehicle without spots. A good wash rinse is the key to getting the most professional results. If you don’t have a D. I. system, there are some easy alternatives to D. I. that are extremely inexpensive. SoSoft, for example, that costs only pennies to use and is almost as effective as using D. I. with your fleet washing chemicals, you just add it to your water for a spot-free rinse.
Connect With Us!