Gladiator Powder Coat Hose Reel Stacking Kit - Available for Pre-Order - Arrives March 2026

Hose Reel Stacking Kit That Mounts Four Reels in One Footprint

Deck space disappears the moment you add a second hose line. This hose reel stacking kit converts that problem into vertical space, letting you mount as many as four Gladiator reels within the footprint of a single unit. The frame is heavy duty steel finished with an industrial powder coating, and every bolt you need is packed with it.

Features

• Stacks up to 4 reels safely, turning wasted vertical space into usable capacity.
• All high strength bolts are included, so installation can happen the day it arrives.
• Designed around Gladiator hose reels for mounting points that line up correctly.
• Industrial powder coating over heavy duty steel guards against corrosion.
• Rigid connection between each level keeps a multi reel stack from flexing.

Specifications

Why Build Up Instead of Out

Trucks and trailers only give you so much square footage, and every reel laid flat on the deck takes room that could hold a tank, a buffer or a generator. Going vertical consolidates several hose lines into one compact station.

The practical payoff shows up on high volume operations running separate lines for different chemistry or pressure ranges. Instead of spreading gear across the bed, you get an organized workstation with a much smaller equipment footprint and a tidier look on a customer site.

Fitment and Hardware

Matching mounting points is what makes a stack rigid rather than rattly. Because this kit is built specifically around Gladiator reel dimensions, the holes align without drilling or shimming.

The supplied high strength bolts create a solid connection between each level, which is what keeps the assembly stable once loaded reels start absorbing road vibration. Nothing in the stack becomes the weak link because the hardware is matched to the frame.

Laying Out a Multi Reel Stack

Put the hose you reach for most on the bottom position and save the upper spots for backup or specialty lines. Over a full day that ordering saves a lot of reaching and climbing.

Re-check the bolts after the first week of driving, since a loaded stack absorbs real vibration on rough roads and fasteners can settle. If you chip the coating during installation, touch it up so corrosion does not get a starting point.

Powder Coat or Stainless for Your Conditions

We stock this rack in two materials, and the right answer comes down to how wet your equipment stays. Powder coated steel is the value pick and it takes normal outdoor exposure without complaint, which covers most inland contractors and anything kept inside an enclosed trailer.

The stainless version costs more and earns it in coastal air, on salt treated winter roads, and around heavy sodium hypochlorite use. If the rig gets washed down daily or parks near the water, step up to that one. Otherwise this kit does the same structural work for less money.

Common Questions

How many reels will this hold?

Up to four.

Is hardware a separate purchase?

No, the high strength bolts come in the box.

Which reels does it fit?

It is made to fit Gladiator hose reels.

Will it hold up outdoors?

The steel carries an industrial powder coating for corrosion protection. In salt heavy or coastal service, a stainless kit is the tougher option.

Complete the Setup

Pick the reels to fill it from Hose Reels, and source mounting hardware, swivels and repair items in Hose Reel Parts. Phone the counter for freight pricing and where this kit sits in the queue.