Reelcraft Pw81000 Ohp Spring Rewind Reel 3/8" X 10
Reelcraft Pw81000 Ohp Spring Rewind Reel 3/8" X 10
- Order Policies
- Item# 6884
Couldn't load pickup availability
Request a Freight Shipping Quote
This item ships via freight carrier. Fill out the form below and we'll get back to you within one business day.
Item #: 6884
We quote every freight shipment individually so you never overpay. Call us at 301-519-9274 for a freight quote and to place your order.
PW81000 OHP Spring Rewind Hose Reel for 3/8 Inch Hose
Model numbers matter more than people expect, and PW81000 OHP is one worth writing on the inside of your trailer door. This spring rewind hose reel is built around 3/8 inch pressure washer hose, so the line pays out when you pull and returns when you walk it back. Having the exact model recorded turns a future parts order into a two minute phone call instead of a guessing game with photos.
Features
- Spring rewind action, so no crank handle and no power feed
- Set up for 3/8 inch pressure washer hose
- Carries the PW81000 OHP model designation for easy parts matching
- Keeps the line off the deck and out of foot traffic between jobs
- Substantial build at roughly forty pounds bare
Specifications
| Model No | PW81000 OHP |
| Type | Spring Rewind |
| Hose ID | 3/8 inch |
| Shipping Weight | 40 lb |
Setting It Up on the Rig
Give the line a straight shot from the rollers to where the operator works. Anything that forces the hose to turn hard as it leaves the drum is going to wear the jacket and stress the guide. Reels mounted in a rear corner and pulled sideways all day fail first.
Check the latch every few months. That little detent is what holds the drum where you set it, and once it stops catching, the spring will drag the line back while somebody is still holding the gun. It is a five second inspection with your hand on the drum.
Common Questions
How much hose does it hold?
The listing we received from the supplier is cut off before the capacity, so we are not going to guess at a number. Call or email us and we will confirm the exact length for the PW81000 OHP before you order.
Why does the model number matter so much?
Because springs, swivels and guide arms are model specific. With PW81000 OHP written down, ordering the right replacement later takes one call.
What about the pressure rating?
We publish only what the manufacturer documents, and the rating is not in the information we have. Reach out with your machine specs and we will confirm the fit rather than putting a number on the page.
Explore Related Gear
See how this one stacks up against the rest of our Hose Reels. Replacement springs, swivels and guide hardware live in Hose Reel Parts.