Y Strainer 1/2" Brass W/S.s. Screen
Y Strainer 1/2" Brass W/S.s. Screen
- Order Policies
- Item# 1286
Couldn't load pickup availability
Y Strainer 1/2" Brass W/S.s. Screen is a professional-grade filters and strainers, brass construction. In stock and ships same day from Sun Brite Supply in Gaithersburg, Maryland.
Product Overview
filter with 1/2 inch ports for pressure washing systems. Catches sand, sediment, and debris before it reaches your pump. A clogged or missing filter is the number one cause of pump damage in the field.
Pump manufacturers void warranty claims when they find debris damage inside the pump. A $15 filter saves you from a $500 pump repair. Run a filter on every machine, every time. No exceptions.
Check and clean your filter after every job. If you are pulling water from a tank, pond, or well, check it more often. Dirty source water clogs filters fast and sends debris straight into your pump if the screen tears.
Key Features and Specifications
- Port Size: 1/2 inch
- Material: Brass. Handles high temperatures and chemical exposure. Will not rust. Standard choice for pressure wash plumbing.
- Cleanable: Remove the screen and flush with water. Reuse until the screen is damaged or stretched.
- Application: Inlet filtration for pressure washers, chemical strainers, and water supply lines
| Port Size | 1/2 inch |
| Material | Brass |
| Type | Inlet filter / strainer |
Compatibility
Inlet filters work with any pressure washer system that has a matching port size. Install between your water source and the pump inlet.
- Garden hose fed pressure washers (install between hose and pump)
- Buffer tank systems (install at the tank outlet)
- Direct-draw systems pulling from ponds, tanks, or wells
- Chemical injection lines (use fine-mesh chemical strainers)
- Hot water systems (check temperature rating before installing)
Match the filter port size to your plumbing. If you need to adapt sizes, check our brass fittings and adapters section for reducers and bushings.
Applications and Use Cases
Every pressure washer needs inlet filtration. Debris in your water supply damages pump valves, seats, seals, and plungers. Here is where filters matter most:
- Job site water supply where the source may have sand, grit, or sediment
- Well water systems where iron, manganese, and particulates are common
- Buffer tank setups to catch tank debris before it hits the pump
- Chemical lines to prevent injector clogs and nozzle blockages
- Reclaim water systems where filtered water is recycled back through the machine
Installation and Maintenance Tips
Install the filter between your water source and the pump inlet. The arrow on the housing (if present) should point toward the pump. Make sure all connections are tight and leak-free.
Clean the filter screen after every job. Remove the screen, flush it with clean water, and inspect for tears or stretched mesh. A torn screen lets debris through. Replace it immediately.
If your pump is losing pressure, surging, or making noise, check the filter first. A clogged filter restricts water flow to the pump. The pump cavitates (starves for water) and the internal components wear out fast.
Keep a spare filter screen in your parts box. When a screen rips on a job, you need a replacement right away or you risk pump damage.
Frequently Asked Questions
How often should I clean my pressure washer inlet filter?
Clean it after every job. If you are working in dusty or sandy conditions, or pulling from a dirty water source, check it during the job too. A clogged filter starves the pump for water and causes cavitation damage.
What mesh size filter do I need?
For general inlet filtration, 50 to 100 mesh works well. Finer mesh (higher number) catches smaller particles but restricts flow more. For chemical strainers, use 80 to 100 mesh. For clean municipal water, 50 mesh is usually enough.
Why does my pump keep failing?
The most common cause of pump failure in pressure washers is debris damage from running without a filter or running with a damaged filter screen. Install a quality inlet filter and check it regularly. Your pump will last years longer.
Where can I buy pressure washer filters and strainers near Gaithersburg, Maryland?
Sun Brite Supply is located at 16620 Oakmont Ave, Gaithersburg, MD 20877. We carry a full selection of pressure washer filters and strainers for walk-in customers and ship nationwide. Local contractors in Maryland, Virginia, DC, and the Mid-Atlantic area can stop by for same-day pickup. If you are outside the area, order online at sunbritesupplymd.com and we will ship it out fast. Call us at 301-519-9274 if you need help finding the right part.
Before You Order: What to Check
Getting the right part the first time saves you a return trip and more downtime. Before you add this to your cart, check these things:
- Model number: Find the model and serial number on your equipment data plate. Write it down before you order.
- Port sizes and thread types: Measure your connections. A 3/8 inch fitting will not thread into a 1/4 inch port no matter how hard you try.
- Pressure and flow ratings: Make sure the replacement part is rated for your system's PSI and GPM. Under-rated parts fail fast.
- Old part comparison: If possible, remove the old part and compare it side by side with the product photos and specs listed here.
- Still not sure? Call us before you order. We would rather spend 5 minutes on the phone confirming fitment than process a return because the wrong part showed up.
Why Buy Your Filters and Strainers from Sun Brite Supply?
Sun Brite Supply ships from our warehouse in Gaithersburg, Maryland. We stock the same brands the pros run. General Pump, Cat Pumps, AR, Honda, Hannay, Suttner, and more. No knockoffs. No mystery brands. Every part we sell has been vetted by people who work on this equipment every day.
Need help picking the right part? Call us at 301-519-9274. You will talk to someone who actually knows pressure washing equipment, not a script reader at a call center. We can verify fitment, suggest alternatives, and match you with the right part the first time. Our team has over 50 years of combined experience in the pressure washing industry. We deal with these machines daily and know which parts work and which ones cause problems.
Local to Maryland or the DMV area? Stop by our Gaithersburg location at 16620 Oakmont Ave for walk-in counter sales. We can pull parts, check fitment in person, and get you set up on the spot. Contractors across the Mid-Atlantic rely on Sun Brite Supply for same-day parts when they need them fast.
We carry over 2,700 pressure washing parts and accessories in stock. Pumps, hoses, fittings, nozzles, chemicals, engine parts, burner parts, and electrical controls. Browse our full catalog at sunbritesupplymd.com and order everything you need from one supplier. One order, one shipment, less downtime waiting on parts.
Most orders ship the same business day when placed before 2 PM Eastern. We ship nationwide from Maryland, so whether you are in Virginia, Pennsylvania, DC, or across the country, you get your parts fast. We keep popular parts in stock so you are not waiting on backorders.
Shop online at sunbritesupplymd.com or call us directly at 301-519-9274. Over 2,700 parts ready to ship. We are here to help you keep your equipment running and your business moving forward.
Protect your whole system. Check our inlet filters, chemical strainers, fuel filters, and in-line screens. Clean filtration saves your pump, unloader, and downstream equipment from expensive damage.