12V Power Rewind Kit 103166 for GPA150, GPA300 and GPA450 Reels
Winding a few hundred feet of wet hose by hand at the end of a long day gets old in a hurry. This 12V power rewind kit does the winding for you, and model 103166 goes on GPA150, GPA300 and GPA450 series reels. Your crew gets loaded out faster and nobody is fighting a full spool in the dark. It also saves the shoulder that has been doing that job for years.
Features
- Model 103166 power rewind kit
- Runs on 12V, so a truck electrical system already covers it
- Fits GPA150, GPA300 and GPA450 series reels
- Motor pulls the hose back instead of your arms
- Speeds up pack out at the end of every job
Specifications
| Model No | 103166 |
| Voltage | 12V |
| Fits | GPA150, GPA300 and GPA450 series reels |
Wiring and Install Notes
Give the motor its own fused circuit straight off the battery rather than tapping an accessory wire that is already doing another job. A rewind motor draws real current when it is dragging a full load of soaked hose, and a shared circuit either trips or sags on voltage at the exact moment you want the pull. Size the wire for the run length, not just the amp draw, because a long undersized lead costs you torque at the drum.
Mount the switch where the operator can see the spool while it turns. Whoever runs it should be watching the hose feed on, ready to stop before a wrap climbs over the flange. If you rewind several times a day off a parked rig, keep a charger on the battery so you are not starting the next job with a truck that will not turn over.
Common Questions
Which reels does kit 103166 fit?
GPA150, GPA300 and GPA450 series reels.
What voltage does it run on?
12V.
Do I need a dedicated circuit?
A fused feed straight from the battery is the way to go, since the motor draws hard under a full load of wet hose.
Upgrade the Whole Reel
Look over current Hose Reels or add rewind hardware and spares from Hose Reel Parts to the same order.