Centurion Stainless Steel 100' Spring Rewind 3/8" Hose Reel

Wall Mount Spring Rewind Hose Reel, Stainless, 100 Feet

Manual cranking gets old fast when hose is moving all day. This wall mount spring rewind hose reel brings the line back on its own, which keeps tangles and trip hazards out of the working area and stretches how long a hose lasts. Stainless construction and a 300 degrees F ceiling suit wash bays, food processing plants and marine air, places where a painted drum rusts through. Maximum pressure is 5,000 PSI.

Features

• 5,000 PSI max pressure: a solid housing sized for high powered pump work
• 300 degrees F max temperature: handles scalding water and aggressive chemistry
• 100 ft capacity: the drum takes a complete run of 3/8 in. line
• Stainless steel construction: holds up in wet, salty and washdown settings
• Centurion swivel included: the swivel comes in the box
• Versatile connections: pairs with the plumbing setups most rigs already use
• Spring rewind mechanism: automatic recovery with no crank needed
• Wall mount design: straightforward installation where floor space is short

Specifications

Built for Rooms That Destroy Painted Equipment

Wash bays, food processing rooms and coastal facilities are hard on gear. Constant moisture, hot water and strong chemistry find every weak spot in a painted surface, and once rust starts on a load bearing part the clock is running. High grade stainless does not give corrosion that opening, so the same unit keeps serving after the environment would have finished off a coated one. The 5,000 PSI housing is matched to the pump feeding it, and the drum is made to take high velocity flow rather than just tolerate it.

Getting the Wall Mount Right

A wall install gets the line off the floor, which is the whole point in a tight bay. Fasten into real structure, not drywall or thin sheet, because the drum plus a loaded spring puts a steady pull on every anchor whenever somebody grabs the line. Studs, block or a backer plate all work. Match your fasteners to the wall material, whether that is concrete, brick or siding, and use rust resistant screws so the mount does not become the weak link. Position it so the hose feeds toward the work area without a sharp bend at the guide.

Cleaner Bay, Longer Hose Life

A hose that gets dragged, stepped on and left in a heap wears out early. Automatic recovery means it goes back to the same protected place after every use, off the concrete and out of the traffic path. That alone buys extra months out of a high pressure line. Instant retrieval also means the bay is presentable between jobs and the crew is not stepping over coils while carrying equipment. Small change, noticeable difference in how a facility runs.

Common Questions

What is the drum capacity?

One hundred feet of 3/8 in. line.

Will it stand up to salt water or constant washdown?

Yes, and that is exactly what the stainless build is for. It is used in wash bays, food processing rooms and marine settings.

What are the pressure and temperature ceilings?

5,000 PSI maximum pressure and 300 degrees F maximum fluid temperature.

Does it have to go on a wall?

It is designed as a wall mount unit, so plan on a vertical surface that can carry the load.

Related Equipment

Compare drum sizes across our Hose Reels, and grab mounting and repair items from Hose Reel Parts.